The Spec Of Power Tool Accessories : *Product Name: 24PCS BITS AND SOCKET SET
*Model: SD-562SP * 6- CR-V Bits, Nickel plated, Size:PH2×PH2×110mm,PH1×100mm(Single end,Reduced)PH2×100mm(Single end,Reduced)PH2×PH2×65mm,PH1×PH1×65mmPH3×SL6×65mm * 4- Single End Hex Bit,50mm(L), Size:2.5, 3, 4, 5 ....
The Spec Of Power Tool Accessories : 1. Product name: 3/8"DR. Universal socket, 6-point.
2. size: 10(mm).
3. L: 46(mm).
4. Weight: (g): 52.
5. ASME/ANSI B107.1-1993. For more information of the universal joint socket, please view our official websit:
http://www.tien-i.com/h-universal.html ....
The Spec Of Power Tool Accessories : Hoisting equipment accessories. For GG/GL/CL winches 25A. ....
The Spec Of Power Tool Accessories : Many workshops are just not large enough to handle full size panels. Here's the solution. Your own panel saw. Just slide the panel into place, adjust for position and cut. It leans against the wall and stands only 2 feet out from it. Fasten it in place for added safety. Use your standard circular saw as the cutter.....
The Spec Of Power Tool Accessories : 1. Tremendously enhance gripping power than traditional key type drill chucks.
2. Very easy and convenient for bit changeover.
3. Eliminates "lost key" problems.
4. Resists impact damage and rust-free by its high quality engineered plastic body.
5. 100% inspection for every chuck, quality guarantee....
The Spec Of Power Tool Accessories : Tungsten, Straight Probe Tip. • Tip Diameter: 10um • Shank Diameter: 20mil (0.5mm)• Length: 1.26inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : Electronic Power Tools Electric Power Tool
M1*38T*9T
M1*44T*18T
M1.5*49T*17T
M1.8*8T*39T
M1.23*14T*35T
M1.25*67T*6T ....
The Spec Of Power Tool Accessories : *Product Name: Lathe Chucks - SOLID ROTARY AIR CYLINDER.
*Type: PNEUMATIC CHUCKS SERIES, LA Series
The Spec Of Power Tool Accessories : *Product Name: Lathe Chucks - PULL BACK CHUCK FIXTURES.
*Type: PNEUMATIC CHUCKS SERIES, MPL Series
The Spec Of Power Tool Accessories : *Product Name: Lathe Chucks - 3-JAW SOLID POWER CHUCK.
*Type: HYDRAULIC CHUCKS SERIES, OP Series.
The Spec Of Power Tool Accessories : Product Name: Lathe Chucks - 2-JAW HIGH SPEED HOLLOW POWER CHUCK.
*Type: HYDRAULIC CHUCKS SERIES, OPT Series.
The Spec Of Power Tool Accessories : *The shank and keyless Drill are combined as one body, so that the Drill Chuck will not be fallen out when heavy cutting is being performed.
*The drill will not be fallen (dropped) out when the machine main spindle is instantly stopped.
*The Run-out is within 0.05mm and high precision can maintained over a long per....
The Spec Of Power Tool Accessories : *Suitable for general electric drill, pneumatic drill, impact electric drill, light weight.
*Key hole hardened by high frequency heat treatment, long service life.
The Spec Of Power Tool Accessories : *Suitable for use on heavy duty & extra heavy duty.
*For milling machine, lathe, drill machine & wood working machine.
The Spec Of Power Tool Accessories : *KEYLESS DRILL CHUCKS.
*TYPE : H.
The Spec Of Power Tool Accessories : *Product Name: KEYLESS DRILL CHUCKS.
*TYPE : XH.
The Spec Of Power Tool Accessories : *Special design & manufacture against for super heavy torque (Clamping capacity) use.
*Owing to inspecting strictly & with excellent RUN-OUT accuracy and quality guaranteed the gripping power is double than the general brand.
*Avoid the drill dropped when used in instant change of direction and equipped wi....
The Spec Of Power Tool Accessories : *INTEGRATED TYPE KEYLESS DRILL CHUCKS
The main shaft is of integrated type, which is much more superior than the traditional design. The major features are as follows
*Extremely rigid construction
*The accumulative tolerances can be reduced to a minimum, since the traditional mechanism requiring an ARBOR to co....
The Spec Of Power Tool Accessories : Tungsten, Straight Probe Tip. • Tip Diameter: 10um • Shank Diameter: 20mil (0.5mm)• Length: 1.26inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten, Straight Probe Tip. • Tip Diameter: 10um • Shank Diameter: 20mil (0.5mm)• Length: 1.26inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten, One-bend Probe Tip. • Tip Diameter: 15 um• Shank Diameter: 20 mil(0.5mm)• Length: 1.26 inch (30mm)• Shape: One Bend • Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten, Straihgt Probe Tip. • Tip Diameter: 20 um • Shank Diameter: 20 mil (0.5mm)• Length: 1.26 inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten, Straihgt Probe Tip. • Tip Diameter: 20 um • Shank Diameter: 20 mil (0.5mm)• Length: 1.26 inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten, Straihgt Probe Tip. • Tip Diameter: 50 um • Shank Diameter: 20 mil (0.5mm)• Length: 1.26 inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten, One-bend Probe Tip. • Tip Diameter: 50 um• Shank Diameter: 20 mil (0.5mm)• Length: 1.26 inch (30mm)• Shape: One-bend • Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten Probe Tip. • Tip Diameter: 100um• Shank Diameter: 20mil (0.5mm)• Length: 1.26inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : Tungsten, One-Bend Probe Tip. • Tip Diameter: 100um• Shank Diameter: 20mil (0.5mm)• Length: 1.26inch (30mm)• Shape: Straight• Box of 10pcs ....
The Spec Of Power Tool Accessories : 1. Product name: swivel hoist hooks.
2. A versatile, general purpose hook suitable for most hoisting equipment.
3. If you have specific requirements, please contact us. 250 kg cap ....
The Spec Of Power Tool Accessories : 1. Product name: swivel hoist hooks.
2. A versatile, general purpose hook suitable for most hoisting equipment.
3. If you have specific requirements, please contact us. 250 kg cap ....
The Spec Of Power Tool Accessories : 1. Product name: Weight Hook.
2. A versatile, general purpose hook suitable for most hoisting equipment.
3. If you have specific requirements, please contact us. 150 kg cap ....
