The Spec Of Electric Spray Guns : 1. Light weight,easy operation,high safety,long durability,paint saving,Suitabel or all kinds of painting conductive workpieces.
2. Can be more properly adjusted current as per different electric conduction of int.
3. High voltage output design is greater to adjusting range and wider utilization than other brands. ....
The Spec Of Electric Spray Guns : Suitable for use water based paints, oil based paints, stains, sealers, rust prevent oils, and any innocent liquids. 1. Weight: 3.3 lbs/1.5kgs. 2. Capacity: 8.5 Oz/min, 240 cc/min. 3. Power dissipation: 85 watt. 4. Container: 1100cc. 5. Spray tip: 0.8mm. ....
The Spec Of Electric Spray Guns : UNOAIR, founded in 1979, is a professional air spray gun manufacturer and exporter for more than 30 years. We specialize in the manufacturing of high quality air spray guns, including professional suction type air spray guns, air gravity feed spray guns, automatic spray guns, H.V.L.P. gravity feed spray guns, professio....
The Spec Of Electric Spray Guns : High volume low pressure syphon type air spray gun with 1,000cc cup & 1.4mm nozzle. 1. Standard nozzle: 1.7 mm.2. Optional nozzle: 1.3,1.4,2.0,2.5 mm.3. Capacity of cup: 1,000 cc.4. Air inlet: 1/4" (ps).5. Fluid inlet: 3/8" (ps).6. Air consumption: 250-270 (l/min.)7. Fluid output: 130-250 cc/min.8. Pa....
The Spec Of Electric Spray Guns : King spark is a professional manufacturer of spray guns and hand tools. With almost twenty years of experience in this field, we have constantly contributed to research and development in order to keep the our products competitive nature in terms of quality and performance.
The Spec Of Electric Spray Guns : Product Description
*Spray distance:200mm.
*Paint viscosity: 20sec./RV-2.
*Nozzle and needle are made of heat treated material with the character of high hardness, antiwear so as to lengthen in-service life.
The Spec Of Electric Spray Guns : This electronic spray gun has a small, yet powerful motor, making it easy to carry and operate. 1. Air pressure: 3 - 4bar2. Glue degree: 16 - 20U3. Max. fluid delivery: 200cc/min4. Normal voltage: 120V / 230V5. Unload speed: 35,000 / 38,0006. Unload current: 1 / 27. Load speed: 28,500 / 27,8008. Load current: 2.1 /....
The Spec Of Electric Spray Guns : Manual electrostatic powder coating spray gun
PG1 manual gun replacement.
One year quality promise.
Attention: the PG1 powder gun control should only be connected to the PGC1 powder gun control. Technical data. OptiSelect manual powder gun.Electrical data. Input voltage 10 V eff. Frequency approx.17 kHz. Max. o....
The Spec Of Electric Spray Guns : Application for the wooden furniture, metal, plastics, leather liquid coating. Can use in the color paint, sealer, top coat spray. Save paint, spray even, high atomizing.
The Spec Of Electric Spray Guns : * Nozzle size: 1.0, 1.2, 1.4, 1.6, 1.8, 2.0mm
* Fluid Outlet: 140~250c.c/min
* Pattern Width: 330~370mm Air Cons: 280~310 l/minCapacity: NonAir Inlet: 1/4"NPSFluid Inlet: 3/8"NPSWorking Pressure: 15 ~ 28psiGun Weight: 546g ....
The Spec Of Electric Spray Guns : UNOAIR, founded in 1979, is a professional air spray gun manufacturer and exporter for more than 30 years. We specialize in the manufacturing of high quality air spray guns, including professional suction type air spray guns, air gravity feed spray guns, automatic spray guns, H.V.L.P. gravity feed spray guns, professio....
The Spec Of Electric Spray Guns : 1. Lowest paints rebound can reduce the paint dust in the spray booth.
2. Two ways assistant air orifice not only adjust the pattern width, but also could get thorough atomization effect.
3. With medium-pressure paint pump can get good atomization and save the equipment invest.
4. Use the valve of Wolfam Carboniz....
The Spec Of Electric Spray Guns : 1. Raise the output of high electrostatic voltage to -70KV could really save the Paints and reacd the purpose of coating automatically.
2. Easy clean design,not only raise the safety but also convenient Maintenance and clean.
3. High voltage generator can adjust electric current to suit different Kinds of paint.
The Spec Of Electric Spray Guns : King Spark is a professional manufacturer of pneumatic spray guns and hand tools. With almost twenty years of experience in this field, we have constantly contributed to research and development in order to keep the our products competitive nature in terms of quality and performance.
The Spec Of Electric Spray Guns : Product Feature
*Exceptional atomization at a very low air cap internal pressure of 0.07MPa.
*Higher transfer efficiency, low spattering and environment-friendly while lowering costs.
*Spray distance:200mm.
*Paint viscosity: 20sec./RV-2.
The Spec Of Electric Spray Guns : Product Feature
*Exceptional atomization at a very low air cap internal pressure of 0.07MPa.
*Higher transfer efficiency, low spattering and environment-friendly while lowering costs.
*Spray distance:250mm.
*Paint viscosity: 20sec./RV-2.
The Spec Of Electric Spray Guns : Product Feature
*Intake pressure can be adjusted as per your demands freely (2.5~3.0 bar), reducible coating rebound, coating saving, slim atomization amplitude, large pattern width, fine particulate, perfect effect, rapid velocity.
*There are various nozzles available to be chosen and matched with kinds of air caps ....
The Spec Of Electric Spray Guns : Product Feature
*Intake pressure can be adjusted as per your demands freely (2.5~3.0 bar), reducible coating rebound, coating saving, slim atomization amplitude, large pattern width, fine particulate, perfect effect, rapid velocity.
*There are various nozzles available to be chosen and matched with kinds of air caps ....
The Spec Of Electric Spray Guns : Product Feature
*Small bulk, easy to operate, suitable for various industries such as medical, foodstuff, textile, publication, plastic, rubber, sheet steel refrigeration, sheet steel lubrication, vacuum packing etc.
*There are various nozzles available to be chosen and matched with kinds of air caps so as to make yo....
The Spec Of Electric Spray Guns : Product Feature
*Intake pressure could be adjusted (2.5~3.0 bar) by free way depending on your demands, reduced coating rebound, saving, slim atomizing amplitude, uniform atomization, large pattern width, fine particulate, perfect effect and rapid velocity.
*Light gun portable, gentle pull force of trigger, flexible ....
The Spec Of Electric Spray Guns : Product Feature
*Intake Pressure could be adjusted (2.0~2.5 bar) by free way depending on your demands, reduced coating rebound, saving, slim atomizing amplitude, uniform atomization, large pattern width, fine particulate, perfect effect and rapid velocity.
*Light gun portable, gentle pull force of trigger, flexible ....
The Spec Of Electric Spray Guns : Product Feature
*Spray distance:250mm.
*Paint viscosity: 20sec./RV-2. .
*Nozzle and needle are made of heat treated material with the character of high hardness, antiwear so as to lengthen in-service life.
The Spec Of Electric Spray Guns : 1. Used for small-scale spray work, common art spray gun and color-output adjustable spray guns are available to be chosen by clients.
2. Suitable for small parts mending, body colored painting , imitated tattoo, artworks etc.
The Spec Of Electric Spray Guns : 1. Used for small-scale spray work, common art spray gun and color-output adjustable spray guns are available to be chosen by clients.
2. Suitable for small parts mending, body colored painting , imitated tattoo, artworks etc.
The Spec Of Electric Spray Guns : 1. Used for small-scale spray work, common art spray gun and color-output adjustable spray guns are available to be chosen by clients.
2. Suitable for small parts mending, body colored painting , imitated tattoo, artworks etc.
The Spec Of Electric Spray Guns : 1. Nozzle and needle are made of SUS303 stainless steel material and applicable to water paint.
2. Spray distance:150mm
3. Paint viscosity: 20sec./RV-2
The Spec Of Electric Spray Guns : 1. Spray gun (complete).
2. Paint container.
3. Viscosity test cup.
4. 3 Meter hose (PVC). 1. Power dissipation: 1100 watt. 2. Electric current: 5AMPS. 3. Air supply: 260 liters/minute. 4. Weight: 4.1kgs. 5. Cup capacity: 1000cc. 6. Hose length: 3 meter. 7. Packing: 3pcs/ctn/3.34’, 14kgs/15kgs. 8. 20&rsquo....
