The Spec Of Drilling Machines : 1. The radial drill arm adopts IC timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
2. Exclusively for gears type cycling oil pump is furnished to cool of....
The Spec Of Drilling Machines : 1. Electricity: 0.75 kw.
2. Air: 0.56 L/Min.
3. M/C cycle time: 8 sec / pc.
4. Water bottle hole drilling M/C.
The Spec Of Drilling Machines : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision.
The Spec Of Drilling Machines : It fits in working big workpieces of molding drilling field and fits in column NC drilling. The working table can take heavy weight and big size of mold and it is suitable for making the cooling holes and pin holes in the mold. The spindle is stepless when the gundrilling is working and it is the most efficiency machin....
The Spec Of Drilling Machines : 1. Available for milling, boring, drilling, tapping and etc.
2. Gear head can be tied 90" right &left each.
3. Clutch operated micro down feed.
4. The headstock is composed 11 pieces precision of gear (all 2.0mm pitch) and all immersed in oil bath.
5. Available CE standard as fig shows such as: electric....
The Spec Of Drilling Machines : 1. Break through agaon in Technology of Drill Sharpener Quick and Precise
2. Cam device: this machine comes with four cams ranging from no.1 to no.4.Simply change the cam when grinding to grind drill, end mill cutter, chamfering cutter,tap, center drill and etc.
3. Drill positioning device:grind drill of different di....
The Spec Of Drilling Machines : 1. Travel:
(1) X-axis travel: 2000, 3000(opt)mm.
(2) Y-axis travel: 1500mm.
(3) Z-axis travel: 1500mm.
(4) W-axis travel: 550mm.
(5) Spindle center to table top: 0~1500mm.
(6) Spindle nose to table center: -130~1055mm.
2. Table:
(1) Table size: 1200 x 1500mm.
(2) T slot (wide x no .x pitch): 22H8 x 7 x ....
The Spec Of Drilling Machines : Engine type: 2 cycle, single cylinder, forced air-cooled, gasoline engine.
The Spec Of Drilling Machines : 1. Compact construction, easy mobility and low cost.
2. Easy to operate.
3. Good for drilling start holes for wire cut EDM.
4. Good for deep hole drilling on super hard alloy and powder metallurgical steel materials.
5. Designed for small, large and irregularly shaped material fine hole drilling.
6. Suitable f....
The Spec Of Drilling Machines : 1. Handle: roller bearing at basement is built round a double column provides max. rigidity and accurancy.
Protection design for limitary safety is utilized in every transmission section.
2.Precision heavy duty: separates speed operation on locking Installation easy and convenient to operate. Excellent & exact Prec....
The Spec Of Drilling Machines : 1. Machines utilising the BTA Deep Hole Drilling System for solid deep hole boring 30–150mm in diameter.
2. Drilling depths up to 5000mm.
3. Coolant filtration to 30 microns.
4. The rigid honeycomb walled Bed gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
5. Hardened and ....
The Spec Of Drilling Machines : No mater what the kind of sanding application, Chin Chao Sheng can provide the machines that fully meet your requirements. We have the resources to design the machine to suit your rigorous requirements.
The Spec Of Drilling Machines : 1. Heavy duty geared head spindle power feed (0.12-0.18-0.25mm per/rev).
2. Hardened MT4 spindle / coolnat base.
3. Drilling capacity in cast iron: 50mm.
4. Drilling capacity in mild steel: 32mm.
5. Tapping capacity: 22mm.
6. Face mill capacity: 100mm.
7. End mill capacity: 25mm.
The Spec Of Drilling Machines : Scaffolding making machinery.
The Spec Of Drilling Machines : We have successfully developed various models of CNC lathes and Bench Lathe that incorporate the latest ideas. Senday's outstanding technical sized by the customers both in domestic and overseas.
The Spec Of Drilling Machines : 1. Spindle motor: 5H x 2P.
2. Slide way drive motor: 1HP x AC.
3. Hydraulic motor: 5HP x 6P.
4. Machining hole Dia.: 2-25 mm.
5. Machining depth: 500 mm.
The Spec Of Drilling Machines : 1. Spindle head longitudinal travel: 1310mm (51.5").
2. Vertical arm travel: 850mm (33.5").
3. Spindle travel: 250mm (9.8").
4. Spindle diameter: φ100mm/ φ70mm (φ4"/ φ2.7").
5. Working capacity (drilling): 66/56(2.6"/2.2").
6. Working capacity (boring): 186/126(7.3/5").
....
The Spec Of Drilling Machines : 1. Model: SC-25L.
2. Swing: 440mm.
3. Drilling capacity: 25.
4. Max. distance spindle to table: 670mm.
5. Max. distance spindle to base: 940mm.
6. Max. spindle stroke: 135mm.
7. Taper of spindle nose: M.T. No.3.
8. Size of table (Round): 420mm.
9. Spindle speed r.p.m.:
(1) 50HZ: 160~1230.
(2) 60HZ: 200~1520.....
The Spec Of Drilling Machines : 1. Throat depth: 120 mm.
2. Drilling diameter: 3-10 mm.
3. Minimum distance between holes: 40 mm.
4. Maximum distance between holes: 260 mm.
5. Motor: 1/2 HP x 2, 1 HP.
The Spec Of Drilling Machines : 1. 1.0 meter x 1.5 meter, the most popular worktable.
2. Function for drilling, tapping and milling long-holes.
3. High rigidness frame, competitive drilling speed.
4. High efficiency motors-> high torques for bigger diameters and high rev. for smaller diameters, Ø 14 -- Ø 50 mm.
5. Features:
(1) Two hydrauli....
The Spec Of Drilling Machines : 1. Vertical sliding base adopts double column design for compact size, easy operation and vertical sliding base using FC-30 casting steel and dove tail design offering accuracy that give 16 x 4 diameter drilling specification with hydraulic system.
2. Clamping mold, which can be manufactured and designed according to ....
The Spec Of Drilling Machines : 1. Grinding shaft speeds: 2300.
2. Read out: 0.01 mm/0.0005".
3. Crown height range: 0.02 mm - 8.00 mm (d - d).
4. Electric source: 220/ 380/ 440 volts (or others) x 3 phases.
5. Overall dimension (l/w/h inch): 25"/17"/18".
The Spec Of Drilling Machines : 1. Patented "auto breaking chips" device-optional attachment for special function.
2. Patented mechanical drilling with "auto discharging chips" device-optional attachment for special function.
3. Main spindle running speed is with 10,000 RPM, it's ideal for processing deep hole, tiny hole, stai....
The Spec Of Drilling Machines : 1. Automatic loading bicycle axis two end drill tapping machine.
2. Strict quality control, best performance, superior quality, complete range of models, simple and easy maintenance, long service life, high reliability.
The Spec Of Drilling Machines : 1.Conveniently to mount on twist drill or hole cutter for automatic drilling and Center-free drilling..
2.Adjusting wheel of cutting force control device can be used for regulating the force of cutting. Therefore, the cutting force for twist drill and hole cutter can be adjusted as you need.
3.Automatic step feed dev....
The Spec Of Drilling Machines : 1. It's to adopt the drill head made by the JAR HON, and tapping main spindle head mated with hydraulic sliding base; only press one time the start button, it can complete the actions of drilling shifting, and tapping. It can be also equipped with the multi-spindle device for the completion of drilling and tapping at a....
The Spec Of Drilling Machines : 1.Patented "auto breaking chips" device -optional attachment for special function.
2.Patented mechanical drilling with "auto discharging chips" device-optional attachment for special function.
3.It's ideal for processing deep hole, tiny hole, stainless steel with the auto chips discharging devic....
The Spec Of Drilling Machines : 1.Conserve JD-8510 Function.
2.Vertical column structure is enlarged, the more stable the more perfect when drilling process.
3.The vertical lift seat is to adopt the model No. JT-6516.
The Spec Of Drilling Machines : 1.It is available for processing of reaming and drill hole, back taper hole.
2.It can be installed with multi-driller for increasing in production efficiency.
3.Main spindle drilling deep hole
is 0.02mm tolerance.
4."Auto breaking chips"— optional attachment for special function.
