Select
The Spec Of Milling Machines : 1. Electricity: 6.84 kw.
2. M/C cycle time: 20 sec / pc.
3. Horizontal double ends tube milling M/C. 1. Dimension (L x W x H): 1900 x 1500 x 1700.
2. Weight (kgs): 1700. ....
Select
The Spec Of Milling Machines : 1. Description: high precision, high efficiency.
2. This CNC horizontal boring and milling machine provides multiple face machining at one time in only one set-up. High indexing accuracy rotary table guarantees mutual accuracy between the faces. Designed for boring, drilling and tapping operations, saves time for set-....
Select
The Spec Of Milling Machines : Continuing VTEC's tradition of high efficiency and high precision, the 70 series have more capacity for machining big components, moulds and die's. These machines are provided with enlarged Y travel to enable the machining of large work pieces. The body is designed in and oversized structure to support heavy loads and ....
Select
The Spec Of Milling Machines : 1. D.C. motor drive, s.c.r control system and steplfss table speeds. (milling $ cutting).
2. Automatic elevation and manual clamp.
3. Automatic elevation of toolholder on upright.
4. Automatic power feed on rail.
5. Forced lubrication for bed slide way and rail.
6. 180° swivel pendant control system.
7. Acc....
Select
The Spec Of Milling Machines : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
Select
The Spec Of Milling Machines : Three-axis servomotors are directly coupled to the ball screws, ensuring the least backlash and high-precision performance Special lubricating circuit ensures even lubrication. Pressure-discharge oil distributor also ensures that each oil injection spot of the slide surfaces receives equal volume of oil, with no waste ....
Select
The Spec Of Milling Machines : 1. Fully digital package control to provide high accuracy & high reliability.
2. Massive meehanite cast iron for rigidity.
3. Turcite surfaces + Hardened/ground slide way.
4. Auto power off. 1. X-Y-Z-Travel: 1650 x 750 x 650mm.
2. Table size: 600 mm x 1800 mm.
3. Siemens 802D control easy-to-operate and progr....
Select
The Spec Of Milling Machines : 1. Three-axis simul taneous feed and rapid traverse: instead of having each axis driven by a separate tiny motor, MILL uses a single powerful 3 H.P. motor to drive all three axes. This means you can be simultaneous feeds or rapid traverse on the table and the knee. The availability of power-feed on the knee (in additio....
Select
The Spec Of Milling Machines : 1. Designed for irregular milling on irregular aluminum door and window frame.
2. The right level control cross and longitudinal movement of milling head.
3. The left level control vertical movement of milling head.
4. Extremely smooth motion allows for effortless milling operations.
5. Workpiece clamping is pn....
Select
The Spec Of Milling Machines : AF501:
1. Speed: 90 (pcs/min).
2. Motor: 30HP
3. Machine size: 170x180x160cm.
AT501:
1. Speed: 90 (pcs/min).
2. Motor: 30HP.
3. Machine size: 170x180x160cm. 1. AF501:
Production size: F14~F55.
2. AT501:
Production size: T19~T64. ....
Select
The Spec Of Milling Machines : TOM-2SG step speed head:
1. 42" x 9"table.
2. 3hp motor.
3. Meehanite castings.
4. Mardened & ground cross slide way and table.
5. Chrome hardened, ground quill.
6. High precision 7207 CP4 spoindle bearings.
7. Turcite-B coated on the cross and longitudinal way.
8. Dovetail way x, y, z axis. Spind....
Select
The Spec Of Milling Machines : 1. NC control machine.
2. Y axis square way, Z axis dove way.
3. Z axis with elevating motor.
4. Spindle speed: variable speed.
5. Mitsubishi / Fanuc control system.
6. Pneumatic tool change.
7. Inverter speed milling head is optional X, Y axis servo motor feed. 1. Table size: 1270x254 mm.
2. Table travel: 7....
Select
The Spec Of Milling Machines : 1. KS-25 and KS-30 belt type complex machine.
2. Designed for various operations, such as vertical milling, end milling, face milling and drilling (tapping function is optional).
3. Chuck arbor.
4. Handwheel.
5. Elevation handle.
6. Knock-out key.
7. Cutting tool and chuck are not included.
8. Standard complex ....
Select
The Spec Of Milling Machines : No mater what the kind of sanding application, Chin Chao Sheng can provide the machines that fully meet your requirements. We have the resources to design the machine to suit your rigorous requirements. 1. Range of work diameter: 2 to 30mm.
2. Upper spindle: 7 1/2HP.
3. Bottom spindle: 7 1/2HP.
4. Feed motor: 1....
Select
The Spec Of Milling Machines : 1. For masticating and kneading natural rubber, synthetic rubber, E.V.A. or P.V.C. pellets with various kinds chemical material and warming the cold material which shall be supplied to the calender. embossing calender or hot presses, etc.
2. This machine is used for mixing and kneading raw rubber, synthetic rubber, th....
Select
The Spec Of Milling Machines : Hammer mill is widely used for pulverizing brittle minerals, electronic and chemical materials. Low capital investment, easy installation and easy handling. 1. Max. Feed size(mm): 75.
2. Speed RPM: 1300.
3. Motor power (HP): 10-15. ....
Select
The Spec Of Milling Machines : Model No: KT-50G screwdrive machine.
Specification:
1. Workpiece diameter: 3 ~ 12mm.
2. Workpiece length: 80 ~ 250mm.
3. Workpiece type: hex / square / round.
4. Collet Chuck: 15 / 25. 1. Spindle motor: 2HP.
2. Hydraulic motor: 1HP.
3. Output (PCE/ per min): 8 ~ 15.
4. Machine dimensions: 155 x 180 x 155.
....
Select
The Spec Of Milling Machines : 1. Rapid traverse on "X", "Y" & "Z" axis.
2. Variable speeds on "X","Y" & "Z" axis.
3. High quality meehanite casting body GC-45/DIN-40.
4. All gears & shafts are hardened.
5. Table swivels 45degrees left & right.
6. All "X", "Y" & &qu....
Select
The Spec Of Milling Machines : 1. Standard accessories: Half-canopied canopy, tool cooling system, auto-grease system, heat-exchanger, RS232 connection line, spindle cooling system, collect holder, collect, lamp, tool set.
2. Extra accessories: full-canopied canopy, high-speed spindle, 4th axis, auto tool compensate system, air dryer. 1. Work t....
Select
The Spec Of Milling Machines : 1.Extremely rigid cast construction:
(1) The main castings including the bed, column, saddle, and table are constructed from hing quality Meehanite castings.
(2) Extra wide base slideways combined with narrow way of straightness guide ensuring high accuracy.
(3) Hardened three axes slideways, heat-treated table surf....
Select
The Spec Of Milling Machines : 1. The drilling of water holes,electric-heating pipe holes.
2. The drilling of valves,controlling units,pushing rods,and pumps.
3. For automative parts industry,aerospace industry,and electric engineering industry. 1. Drilling diameter range: 6-32 mm.
2. Drilling depth: 1800 mm.
3. X-axis travel: 2000 mm.
4. Y....
Select
The Spec Of Milling Machines : 1. 70 series do have four box guide ways to achieve the most rigid support for X- and Y- axis.
2. Unique lubrication technique of gibs and automatic lubrication system assures high accuracy for a long time.
3. An oil cooler for spindle cooling is standard equipment on the machine. This cooler works with room temperat....
Select
The Spec Of Milling Machines : 1. Four way expansion type main boring & face milling machine.
2. Strict quality control, best performance, superior quality, complete range of models, simple and easy maintenance, long service life, high reliability. According to cutomer's designs and specifications. Please Contact Us. We shall proceed your reque....
Select
The Spec Of Milling Machines : 1. Product name: milling machine.
2. Product No.: CS-U500. Table:
1. Working surface: 1500 x 300mm.
2. Travel longitudinal x cross x vertical: 1050 x 320 x 470mm.
3. T-slot (wide x no.x pitch): 16mm x 3 x 70mm.
4. Longitudinal x cross (60Hz): 13~621mm/min.
5. Longitudinal x cross (50Hz): 11~517mm/min.
6. Fe....
Select
The Spec Of Milling Machines : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
Select
The Spec Of Milling Machines : 1. Product name: horizontal milling machine.
2. Product No.: CS-H450. Table:
1. Working surface: 1300 x 300mm.
2. Travel longitudinal x cross x vertical: 950 x 320 x 470mm.
3. T-slot (wide x no.x pitch): 16mm x 3 x 70mm.
4. Longitudinal x cross (60Hz): 13~621mm/min.
5. Longitudinal x cross (50Hz): 11~517mm/m....
Select
The Spec Of Milling Machines : 1. Product name: bed type vertical boring and milling machine.
2. Product No.: CS-VBM-3V. 1. Table travel (longitudinal): 1000mm (39-3/8").
2. Table travel (cross): 380mm (14-15/16").
3. Spindle head travel (vertical): 500mm (19-11/16").
4. Spindle nose to table top: 100~600mm (3-15/16"~23-5....
Select
The Spec Of Milling Machines : 1. These heavy duty bed mills offer high rigidity with the bed transmission slung low between the wide Y-axis ways.
2. Hydraulic head clamping for CS-VBM-5VL. 1. Table travel (longitudinal): 1500mm (59").
2. Table travel (cross): 600mm (23-5/8").
3. Vertical spindle head travel (vertical): 700mm (27-9/....
Select
The Spec Of Milling Machines : 1. Product name: CNC horizontal milling machine.
2. Product No.: CS-VNC450. 1. Table travel (x axis): 760 mm.
2. Table travel (y axis): 300 mm.
3. Table travel (z axis): 300 mm.
4. Distance from spindle center to table top: 50~350 mm.
5. Distance from spindle center to overarm: 135 mm.
6. Distance from spindl....
Select
The Spec Of Milling Machines : 1. Table size(mm): 1067 x 228.6.
2. Longitudinal travel (x)(mm): 710/850 (spec.). 1. Cross travel (y)(mm): 315.
2. Vertical travel (z)(mm): 410. ....