The Spec Of Grinding Machines : 1. Into force: 240W.
2. Current: 2.5A.
3. No-load speed: 23000rpm.
4. Diameter of main spindle ring: 35mm.
5. Diameter of grinding wheel: 25mm.
The Spec Of Grinding Machines : 1. High precision and high rigidity.
2. High efficiency.
3. Single piece base casting.
4. Longitudinal mechanism.
5. CNC control.
The Spec Of Grinding Machines : 1. Choice of workpiece: it can grind mould for any kind size. the sild.
2. Of tool machine: it can grind square, V and a type of slide.
3. Industrial machine: it can griand large surface iron plate, steel.
4. Courre angle tool accurancy qualified to meet jsb6207 standard.
The Spec Of Grinding Machines : JIH-280 Tungsten carbide tip circular sawblade grinder:
1. MODEL: JIH-180/ JIH-280A.
2. Grind capacity: F900x9.5mm F900x9.5mm
3. Grind wheel size: F150x16mm.
4. (Diamond grinding wheel): F150x16mm.
5. Grind wheel speed: 4000rpm 5000rpm.
The Spec Of Grinding Machines : 1. Grinding capacity: 660 x 127 x 15.8 mm.
2. Grinding power: 2 hp.
3. Grinding wheel size: 150 x 100 x 25.4 mm.
The Spec Of Grinding Machines : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
The Spec Of Grinding Machines : Features:
This machine is suitable for cowhide, pighide, EVA & rubber sole etc., making grind roughen and convenient for cementing.
The Spec Of Grinding Machines : 1. Precision, rigid spindle: the grinding wheel spindle is supported by two special hydrodynamic bearings on the ends with five-point support, providing maximum rigidity and stability of spindle running. In case insufficient lubrication oil occurs, the spindle stops automatically to avoid wearing on the spindle and bea....
The Spec Of Grinding Machines : The main service items are spring equipments for vehicles, such as spring machines, spring end grinding machines and peripherals.
Fully support various requirements of our customers.
The Spec Of Grinding Machines : 1/4" (6nn) industrial roll (lever) type throttle medium air die grinder.
The Spec Of Grinding Machines : Composite pistol handle trigger type air grinder.
1. #CG25: 1/4" collect.
2. #CG25M: 6mm collect.
3. #CG25-3: 3mm collect.
The Spec Of Grinding Machines : Longitudinal movement:
1. Manual travel: 510mm(20").
2. Hydraulic traverse: 510mm(20").
3. Table speed (infi variable): 3~25mm(1/8~1").
The Spec Of Grinding Machines : 1. High quality cast, ageing treatment.
2. Wearable slice coated with slide way.
3. Table and slide way precisely scraped.
4. Taiwan precise grinding head.
5. Three axes manually operated.
The Spec Of Grinding Machines : 1. Max tool length: 200mm.
2. Max chuck dia: 32mm.
3. Max swing over table: 200mm.
4. Grinding spindle speed: 1000~6000rpm.
5. Main motor: 3Hp (2.25kw) / 5Hp (3.75kw).
6. X axis travel: 200mm.
The Spec Of Grinding Machines : Designed for surface sanding for audio equipment panels, punch burrs, tools, hand tools, sport goods, home appliance, etc.
The Spec Of Grinding Machines : 1. Working table area: 125 x 520mm.
2. Longitudinal travel of table: 185mm.
3. Cross travel of saddle: 120mm.
4. Adopt precise 6-pawl chuck, could grind the 6 faces of the gun drill just be clipped one time. Any sizes could be ground and could keep the gun drill center without off center.
The Spec Of Grinding Machines : 1. Power input: 1,000w.
2. Amp: 9.5A.
3. Wheel diamter: 5".
4. Hole diameter: 7/8".
5. R.P.M: 11,000.
6. Net weight: 2.5Kg.
7. Cord lengh: 2.5m(8.2").
The Spec Of Grinding Machines : 1. Manual grinder.
2. Motor (HP): manual.
3. Dimensions (mm): 242 x 110 x 310.
4. Weight (kg): 2.2.
The Spec Of Grinding Machines : 1. With safety throttle lever, built-in speed regulator.
2. Grinding wheel / cutting wheel size: 2 inch (not included).
The Spec Of Grinding Machines : 1. Table size:
1. 300X650mm.
2. Distance between spindle centers to table surface: 600mm.
2. Table longitudinal movement:
1. Max hydraulic travel 650mm.
2. Max. manual travel 750mm.
3. Infinitely variable speed 5-25m/min.
The Spec Of Grinding Machines : 1. Application: suitable for grinding the trimming and cutting tool of rubber parts, plastic parts, PU parts.
2. Features:
(1) Is available to grind knife of the sharp angle and arc angle.
(2) Attached with diamond grinding wheel, and is able to grind for tungsten carbide. It is sharp and fast.
(3) Make the knife....
The Spec Of Grinding Machines : 1. Using CBN formed grindwheel.
2. Shape fixed- longer service hours.
3. Less wear-out.
4. High precision grinding.
5. Using formed grindwheel, 100% to regain a drill.
6. All cutting edge, chit shape, thinning, relief Angle are already fixed on grinder no need spending time positioning nor worrying about precisio....
The Spec Of Grinding Machines : For grinding HSS and CARBIDE engraving cutter as well as single. lip or multiple-lip cutters of various shapes such as radiused cutters or negative taper angle of cutter. The universal index head is provide at 24 positions so that any particular angle or shape can be obtained, free 386oor 180o rotation is allowed. For ....
The Spec Of Grinding Machines : Well suited sharpening knives in various industries such as plastics crushing knives, paper cutting knives, chipboard cutting knives, and plastics cutting knives...all kinds of straight knives. (The magnetic chuck is available on request)
The Spec Of Grinding Machines : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
The Spec Of Grinding Machines : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
The Spec Of Grinding Machines : 1. End mill grinder - the end mill grinder is mainly applied to CNC lathe, CNC machining center, die making.
2. Break through Agaon in technology of drill sharpener quick and precise.
3. Cam device: this machine comes with four cams ranging from no.1 to no.4. simply change the cam when grinding to grind drill,end mil....
The Spec Of Grinding Machines : 1. End mill grinder - the end mill grinder is mainly applied to CNC lathe, CNC machining center, die making.
2. Break through Agaon in technology of drill sharpener quick and precise.
3. Cam device: this machine comes with four cams ranging from no.1 to no.4. simply change the cam when grinding to grind drill,end mil....
The Spec Of Grinding Machines : 1. This grinding machine features precision structural design and a range of useful functions with the added plus of easy operation.
2. All adjustments and blade replacements are carried out with the protective cover in place for the ultimate in safety and noise reduction.
3. This is a powerful yet operator- and envi....
