1. 4 Processes in 1 Machine (cutting, chamfering, washing, length measuring)
2. The one and only complete processing cell for tubes and bars, the SA-65/2+MB6 offers multiple machining processes built-in-one:
(1) Cutting.
(2) Chamfering / centering / threading / milling.
(3) Air blow or fluid washing.
(4) Length m....
Hardware features: supporting high precision and reliability.
1. V-shaped base structure with high rigidity designs, allowing wide guide-way maintaining best optimum dynamic precision massive feed in.
2. Super-sized column structure and big cross beam support, giving the best rigid structure.
3. Ruggedly constructed....
It fits in working big workpieces of molding drilling field and fits in column NC drilling.
1. Rapid federate:
(1) 3-axes cutting feedrate(mm/min): 1~4000.
(2) 3-axes guideways: X.Y.Z Linear way.
(3) 3-axes rapid feedrate(m/min): X.Y-12, Z-8.
2. Motor:
(1) Spindle motor(kw): 15 / 18.5.
(2) X, Y, Z servo motor(kw): 22 / 3kw(Y axis with brake); 22 3kw (Y axis with brake).
(3) Coolant pump:....
1.
(1) Spindle speeds: 8000RPM (optional 12000RPM).
(2) Rigid tapping up to 6000RPM.
(3) Direct drive spindle motor system provides minimum power loss of transmission and stable running performance.
2.
(1) 3-axes rapid travels: 48m/min.
(2) Tool loading capacity: 24 tools.
(3) Special single piece of X-axis cov....
1. X / Y / Z axex travel: 1700/1200/750 mm.
2. Table size (LXW): 1600X1050 mm.
1. 1250 x 720 x 610 mm travel (X -Y - Z).
2. 20 HP high power spindle motor.
3. Table size 700 x 1350 mm.
4. BT40/8,000 RPM spindle.
5. 20m/min rapid speed.
6. Solid box y-axis 4-way construction.
7. Integrated chip auger.
8. Standard umbrella type ATC (20 Tools).
9. High speed arm type ATC available (24 or 40 ....
Unquestionable reliability:
1. Victor's new Vcenter-H500 has been designed in the manner that all Victor machines have been designed in for over 40 years, that of a mixture of the highest of quality standard and rock solid reliability.
2. Following the success of the Vcenter-H630, the emphasis has continued to be p....
1. High-quality linear guideways are professionally mounted and adjusted to guarantee superior feed accuracy and long service life.
Utilizes maxmill high-speed technology with advanced servo mechanisms and a direct drive spindle.
2. High speed (15,000 RPM) and high revolution accuracy, low noise, minimum vibration ....
1. X 1300mm (51.2")/Y 650mm (25.6")/Z 650mm (25.6").
2. 24 tool magazine (BT-50, CAT-40).
3. 6,000 RPM spindle speed.
1. Best quality mehanite cast.
2. Taiwan C3 grade sealed ball, leading screw.
3. Tempered, quenched and hardened slide way.
4. Every machine precisely checked by Britain renishaw lase and ball bar.
5. Taiwan precise spindle.
1. One-piece strong structure double column.
2. Roller hi-rigid linear guide way.
3. Through cooling ball screw.
4. HSK-E40/ 24000 RPM motor spindle.
1. Ruggedly constructed 4 boxway base and box type structure on other major parts for outstanding rigidity and stability.
2. Precision scraping assures long term accuracy and maximum wear resistance.
3. The axis motor are directly coupled to the ball-screw, it ensures the least backlash and long lasting accuracy.
4.....
1. The major structures are manufactured from Meehanite cast iron, stress relieved and combined with scientific rib reinforcement to ensure deformation-free operations.
2. Increased width on the column bottom with box-type structure provides maximum stability especially when performing high-speed cutting.
3. Linear....
1. Extremely rigid cast construction:
(1) The main castings including the bed, column, saddle, and table are constructed from hing quality Meehanite castings.
(2) The casting is calculated by computerized limited ultimate analysis, combined with reasonable structure strength and reinforced ribs to provide high rigidn....
1. 70 series do have four box guide ways to achieve the most rigid support for X- and Y- axis.
2. Unique lubrication technique of gibs and automatic lubrication system assures high accuracy for a long time.
3. An oil cooler for spindle cooling is standard equipment on the machine. This cooler works with room temperat....
1. Table dimensions(mm): 630 x 630 x 1°.
2. T-slots(mm): CD100 x 18 x 5 slots.
3. Max. loading: 1200kg.
4. Travel:
(1) Max. travel(mm): 1000 x 650 x 750.
(2) Spindle nose to work table surface(mm): 215-965.
(3) Spindle center to slideways(mm): 120-770.
5. Spindle:
(1) Sidle taper: BT50.
(2) Spindle diamet....
1. Travel:
(1) X-axis travel(mm)： 1000.
(2) Y-axis travel(mm)： 650.
(3) Z-axis travel(mm)： 750.
2. Spindle nose to work table surface(mm)： 215 - 965.
3. Spindle center to work table(mm)： 260 - 910.
4. Spindle:
(1) Sidle taper： BT50.
(2) Spindle speed(rpm)： 45~4500(ST).
5. Rapid feedrat....
1. X-axis travel: 2200 mm.
2. Y-axis travel: 2300 mm.
3. Z-axis travel: 920 mm.
4. Working surface: 2200 x 2050 mm.
1. X-axis travel: 570 mm.
2. Y-axis travel: 510 mm.
3. Z-axis travel: 520 mm.
4. Spindle speed: 10000 rpm.
5. Spindle motor: 11 kw.
1. X-axis travel: 1100 mm.
2. Y-axis travel: 610 mm.
3. Z-axis travel: 610 mm.
Vertical machining center.
1. X-axis travel: 2040 mm.
2. Y-axis travel: 915 mm.
3. Z-axis travel: 600 mm.
1. X 1100mm(43.3")/Y 550mm (21.6")/Z 510mm (20.1").
2. 24 tool magazine (BT-40, CAT-40).
Description of standard accessories:
1. Full length enclosure VMC-84, VMC-115.
2. Splash table guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
3. Remote manual pulse generator (M.P.G.).
4. Oil & coolant separator.
5. Automatic lubrication system.
6. Taper air through spindle.
7. collant unit.
8. Spindl....
1. X 1900mm (74.8")/ Y 900mm (35.4")/ Z 700mm (27.6").
2. 32 tool magazine (BT-50, CAT-50).
1. X 2200mm (86.6")/ Y900mm (35.4")/ Z700mm (27.6").
2. 32 tool magazine (BT-50, CAT-50).
1. 1020 x 600 x 600 mm travel (X-Y-Z).
2. 20 HP high power spindle motor.
3. Table size 600 x 1100 mm.
4. BT40/8,000 rpm spindle.
5. 24m/min rapid speed.
6. Solid box way construction.
7. Integrated chip auger.
8. Standard umbrella type ATC (20 Tools).
9. High speed arm type ATC available (24 or 40 Tools).
10....
1．Heavy duty 14,000kg frame built for rigidity, durability and outstanding ．High-performance machining.
2．1620mm x 900mm x 750mm travel (X -Y - Z).
3．Powerful 30HP spindle motor, BT 50/6,000 rpm spindle, 16 m/min Rapid speed.
4．Table size 950 x 1800 mm, 2000kg table loading.
5．Heavy-duty solid 4 box wa....
1. Model: JY-MV820
(1) Table dimensions: 950 x 450 (mm).
(2) T-slots : CD100x18x4 slots (mm).
(3) Max. loading: 600 (kg).
2. Rapid feedrate:
(1) 3-axes cutting feedrate: 1-8000 (mm/min).
(2) 3-axes rapid feedrate: X, Y, Z-20 (m/min).
