The Spec Of Lathe Manufacturers : 1. LA also can TA: The single spindle automatic lathes TA , are used for the manufacture of a great variety of simple and complex turned parts which are relatively short as compared with their diameters.
2. Cross slide with toolholders, front and rear.
3. Double vertical slide with toolholders.
4. Tailstock with ....
The Spec Of Lathe Manufacturers : The Most Economical Compact CNC Lathe
Rigid Structure! High Positioning Accuracy! Profitable Machining!
The SMART series CNC lathe lets you enjoy extraordinary precision and productivity. When you select SMART series, you get more than greater production. You also get all the traditional JINN FA quality, and consist....
The Spec Of Lathe Manufacturers : 1. Built on the body of Vturn-36 this slant bed lathe has been specifically developed for max. efficiency in alloy wheel processing. Horizontal type lathe minimizes chip build up in wheel to prevent swarf marring the surface during operation. The machine's ample capacity allows wheels of up to 20" to be processed ....
The Spec Of Lathe Manufacturers : 16/18”STANDARD ACCESSORIES:
CNC controller: FAGOR 8035
Main spindle motor with inverter
Auto lubrication system
Coolant system
Splash guard
RS-232 port
Work light
Adapter sleeve and Tool centers
Leveling bolts & pads
Tool box with oiler, spare fuse, paint & tools
Operation & service m....
The Spec Of Lathe Manufacturers : 1. 280mm (11") swing over bed.
2. 457mm (18") distance between centers.
3. Dual range inch/metric quick change gearbox.
4. Infinitely variable spindle speeds from 0-4000 RPM
5. Full bearing carriage with turcite-b slideway bearing material between carriage and bed.
6. The spindle is mounted in high ....
The Spec Of Lathe Manufacturers : Description of standard accessories:
1. Full length enclosure VMC-84, VMC-115.
2. Splash table guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
3. Remote manual pulse generator (M.P.G.).
4. Oil & coolant separator.
5. Automatic lubrication system.
6. Taper air through spindle.
7. Collant unit.
8. Spindl....
The Spec Of Lathe Manufacturers : 1. Efficient, accurate power turret (optional):
(1) The electric H4 turret is driven by a worm gear/worm wheel mechanism for convenient tool change. It is powered by a 375 W. motor with great clamping force up to 1 ton.
(2) Specially designed post body prevents coolant and chips getting into post. Body will not move....
The Spec Of Lathe Manufacturers : Features
Twin CNC System Single spindle, two turrets
Single spindle (fixed) , two turrets (movable) and twin CNC system. Two turrets can operate simultaneously and carry out different cutting process on both ends.
Shaft , rod , or tubes both ends cutting (O.D.&I.D) are carried out simultaneously to obtain very high....
The Spec Of Lathe Manufacturers : 1. High quality wood working machine.
2. Supply customers the machines they need.
3. Professional wood working machine. Welcome to contact us any time from anywhere. 1. Model: WL-120 / WL-120L.
2. Operating motor: 7.5HP-5HP x Pump3HP / 7.5HP-5HP x Pump 5HP.
3. Process length: 180mm-1150mm / 180mm-1370mm.
4....
The Spec Of Lathe Manufacturers : H-9150 Max.drilling capacity Ø35mm
The Spec Of Lathe Manufacturers : Good Single Spindle Auto lathe.
We supply our best quality lathes to meet your requirement.
The Spec Of Lathe Manufacturers : SLANT BED CNC LATHE WITHE y AXIS Spindle Type A2-6
Spindle Speed 3800 rpm
Max.Cutting Dimater 310mm
X Travel 225mm(175+50)
Z Travel 790mm
Y Travel 110mm(±55)
Turret Baruffaldi ....
The Spec Of Lathe Manufacturers : Intergral type (body and bottom) with oblique body and good vibrabtion resistance;
Good water resistance, convenient escaping of chips and high speed cutting;
High-precise oil chuck and the precise tool apron with high effciency;
High precise and stable operation. 1. Max tactical diameter of body: 380mm.
2. Max....
The Spec Of Lathe Manufacturers : Production expands the metal network, for instance: fhombus network, hexagon network, special design network, etc. 1. Applicable material thickness: 0.5~8.0T mm max.
2. Mesh: 10~100mm (SW) x 20~200mm (LW) max.
3. Applicable material width: 2500mm max.
4. Operation area space: approximately 6 M x 10 M.
5. Applic....
The Spec Of Lathe Manufacturers : 1. Electricity: 2.25 kw.
2. M/C cycle time: 5 sec / pc. 1. Dimension (L x W x H): 1670 x 920 x 1220.
2. Weight (kgs): 900. ....
The Spec Of Lathe Manufacturers : A combination of a high precision manual lathe plus a lathe with digital readout, powerfeed and JOG modes, teach modes for CNC and CNC capability. 1. 610 mm (24") swing, 1000mm,1500mm & 2000mm center distance.
2. D1-8 Ø85mm mm spindle bore. A2-11-Ø105 mm available.
3. 15 HP, 3-geared range programmable spe....
The Spec Of Lathe Manufacturers : This CNC turning machine is specially designed for turning master and clutch cylinder head surface, drilling center hole, and drilling back center hole. Special fixture is mounted on this turning machine. Machine Specification:
1. Spindle motor: 20HP
2. Spindle RPM: Max. 15,000
3.Controller:Fanuc OI-Mate
4.Spin....
The Spec Of Lathe Manufacturers : This m/c is being a heavy- duty model which can be installed two sets templet, Since, those can be fed vertically & horizontally, besides, the general turnings, that can be processed more large workiece such as the octant table column, bed pillar, chair leg etc.
This m/c is suitable for solid wood turnings for which ....
The Spec Of Lathe Manufacturers : 1. Working width: 3 x 6 FT~ 4 x 8 FT.
2. Jaw opening: 870~1200mm.
3. Overturning drive motor: 2 HP x 1 set.
4. Left-right rotation drive motor: 1/2 HP x 1 set.
5. Hydraulic pump motor: 2 HP x 1 set. 1. Machine dimensions: (LxWxH) 1900 x 2270 x 3230 mm.
2. Weight: 2500k. ....
The Spec Of Lathe Manufacturers : 1. Max. turning diameter 20mm.
2. Both guide bush / Non guide bush holder are available for making complicated components.
3. Four axes simultaneously movement (X/Y/Z/B/C) work with main / sub tooling system.
4. With cross drilling, it works well in milling, drilling and tapping.
5. Main and sub spindle can drill s....
The Spec Of Lathe Manufacturers : 1. Standard equipment: drive center, cup center, 3" faceplate 4" tool rest. Inboard, outboard tool rest base.
2. Optional accessory: live center, 12" tool rest, 6" faceplate ( RH&LH), safety shield. 1. Swing over bed: 12".
2. Swing over outboard bed: 16".
3. Head and tailstock t....
The Spec Of Lathe Manufacturers : 1. Flat bed type: 40NC/60NC/80NC.
2. Swing over bed: 400mm(17-5/16").
3. Distance between centers: 1000mm(40"), 1500mm(60"), 2000mm (80").
4. Swing over gap: 660mm(26") 1. Swing over bed: 40/60/80NC: 400mm. 2. Swing over cross slide: 40/60/80NC: 190mm. 3. High of center: 40/60/80NC: 22....
The Spec Of Lathe Manufacturers : Sliding head type GNP-1724-D:
1. Opposed gang-type toolpost structure enables high-speed tool selection due to the short tool changing stroke.
2. High-precision machining is possible by the rigid gang-type toolpost.
3. Stabilized spindle rotation is guaranteed by the built-in spindle motor.
4. Reference-point r....
The Spec Of Lathe Manufacturers : 1. Description:
(1) Unsurprssed high speed.
(2) High performance and high precision.
2. Features:
(1) Swing over bed ø 450mm.
(2) Max. turning diameter ø 250mm.
(3) Max. turning length ø 600mm.
(4) Choice of 8, 12, 23 station turret or power turret.
(5) Modular design provides variety of options for cost e....
The Spec Of Lathe Manufacturers : Model No: KT-15 pneumatic head lathe.
Specification:
1. Workpiece diameter: 1 / 4 H ~ 5 / 16 H.
2. Workpiece length: 25~ 50mm.
3. Workpiece Type: Hex/ Round.
4. Collet chuck: 15. 1. Spindle motor: 1HP.
2. Output (PCE/ per min): 15~ 20.
3. Machine dimensions: 120 x 90 x 140.
4. Net weight: 240 kg. ....
The Spec Of Lathe Manufacturers : This lathe doesn't use threading gearbox, instead computer-controlled servo motor is directly linked to the leadscrew. Just use your finger to select desired thread pitch on the touchscreen display, the threads come out absolutely precise and you totally eliminate problems with specialized threads. The disply also ....
The Spec Of Lathe Manufacturers : Good Single Spindle Auto lathe.
We supply our best quality lathes to meet your requirement.
The Spec Of Lathe Manufacturers : Dual spindle cnc lathe - Max. 28 tools
Synchronous rotary guide bushing device for swiss type
End side live tooling device for main spindle and sub spindle (optional)
The Spec Of Lathe Manufacturers : Swiss type.
End side live tooling device (option)
The Spec Of Lathe Manufacturers : Good Single Spindle Auto lathe.
We supply our best quality lathes to meet your requirement.
