The Spec Of Machine Tool Manufacturers : 1. The radial drill arm adopts IC timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
2. Exclusively for gears type cycling oil pump is furnished to cool of....
The Spec Of Machine Tool Manufacturers : 1. NC control unit with touch screen interface.
2. 8 Programmable bending angles.
3. 8 rotation angles through the carriage CAM system.
4. 8 lengths stoppers.
5. On-screen data setting and large file storage.
6. Hydraulic clamping and pressure die systems.
7. Easy operation interface and enable easy data input. ....
The Spec Of Machine Tool Manufacturers : 1. Precision, rigid spindle: the grinding wheel spindle is supported by two special hydrodynamic bearings on the ends with five-point support, providing maximum rigidity and stability of spindle running. In case insufficient lubrication oil occurs, the spindle stops automatically to avoid wearing on the spindle and bea....
The Spec Of Machine Tool Manufacturers : 1. High precision and high rigidity.
2. High efficiency.
3. Single piece base casting.
4. Longitudinal mechanism.
5. CNC control. 1. Max. grinding length: 500 mm (20").
2. Max. grinding width: 250 mm (10").
3. Table working surface: 250x500 mm (10"x20").
4. Max. distance from table surfac....
The Spec Of Machine Tool Manufacturers : CNC high-speed twin stations hot-stamping & die-cut machine:
300 rpm (imp/min) super high speed off-line or 250 rpm (imp/min) on-line with SPM-340LR: shaftless letterpress full / intermittent rotary printing machine. 1. Max. web width: 340 mm.
2. Max. die-cut (hot stamping) area: 330(L) x 310(W).
3. Max. spee....
The Spec Of Machine Tool Manufacturers : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
1. Adjustable clamping height.
2. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting heigh....
The Spec Of Machine Tool Manufacturers : 1. 1.0 meter x 1.5 meter, the most popular worktable.
2. Function for drilling, tapping and milling long-holes.
3. High rigidness frame, competitive drilling speed.
4. High efficiency motors-> high torques for bigger diameters and high rev. for smaller diameters, Ø 14 -- Ø 50 mm.
5. Features:
(1) Two hydrauli....
The Spec Of Machine Tool Manufacturers : 1. We offer waterjet cutting service.
2. Our workshop has OMAX waterjet cutting machine model 55100, which provide professional, precise and fast waterjet cutting service.
3. OMAX 55100 jetmachining center.
4. Precision machining workhorse: from prototypes to production runs, create parts in a variety of materials i....
The Spec Of Machine Tool Manufacturers : 1. X 1300mm (51.2")/Y 650mm (25.6")/Z 650mm (25.6").
2. 24 tool magazine (BT-50, CAT-40).
3. 6,000 RPM spindle speed. 1. Travel:
(1) x axis travel: 1300mm.
(2) y axis travel: 650mm.
(3) z axis travel: 650mm.
(4) distance of spindle end to table: 150mm~800mm.
(5) distance of spindle center....
The Spec Of Machine Tool Manufacturers : 1. From the initial design stages through to the final testing, machine production is tightly controlled and monitored adhering strictly to the principles setout in ISO 9001.
2. In today's increasingly competitive market, Victor has held true to traditional methods of building quality and reliable machine tools that w....
The Spec Of Machine Tool Manufacturers : 1. LA also can TA: The single spindle automatic lathes TA , are used for the manufacture of a great variety of simple and complex turned parts which are relatively short as compared with their diameters.
2. Cross slide with toolholders, front and rear.
3. Double vertical slide with toolholders.
4. Tailstock with ....
The Spec Of Machine Tool Manufacturers : 1. Sharpen and recondition.
2. Parts with complex shape. 1. Workhead Swing over main slide, max. dia.: 304 mm.
2. Collet work dia. max.: 32 mm.
3. Collet work dia. min.: 3 mm.
4. Lead generated by spiral lead machanism, min.: 0°~45°.
5. Length between spindle nose and tail center, max.: 125 mm.
6. Wheelhead....
The Spec Of Machine Tool Manufacturers : The Most Economical Compact CNC Lathe
Rigid Structure! High Positioning Accuracy! Profitable Machining!
The SMART series CNC lathe lets you enjoy extraordinary precision and productivity. When you select SMART series, you get more than greater production. You also get all the traditional JINN FA quality, and consist....
The Spec Of Machine Tool Manufacturers : 16/18”STANDARD ACCESSORIES:
CNC controller: FAGOR 8035
Main spindle motor with inverter
Auto lubrication system
Coolant system
Splash guard
RS-232 port
Work light
Adapter sleeve and Tool centers
Leveling bolts & pads
Tool box with oiler, spare fuse, paint & tools
Operation & service m....
The Spec Of Machine Tool Manufacturers : 1. 280mm (11") swing over bed.
2. 457mm (18") distance between centers.
3. Dual range inch/metric quick change gearbox.
4. Infinitely variable spindle speeds from 0-4000 RPM
5. Full bearing carriage with turcite-b slideway bearing material between carriage and bed.
6. The spindle is mounted in high ....
The Spec Of Machine Tool Manufacturers : 1. Sotek Technology Co., Ltd., a company endeavors to be perfect on quality, service, competition, and responsibility, spinning off in 2004 from Soartek Co., Ltd. (established in 1989), now managed by Mr. Sunny Liu.
2. Mr. Liu believes quality is the only and the best way to compete and survive. This goal has stimulat....
The Spec Of Machine Tool Manufacturers : 1. Machines utilising the BTA Deep Hole Drilling System for solid deep hole boring 30–150mm in diameter.
2. Drilling depths up to 5000mm.
3. Coolant filtration to 30 microns.
4. The rigid honeycomb walled Bed gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
5. Hardened and ....
The Spec Of Machine Tool Manufacturers : Main products:
1. Needle roller and cage assembilies.
2. Needle roller bearings with ribs.
3. Needle roller bearings without ribs.
4. Inner rings.
5. Yoke type track rollers.
6. Stud type track rollers.
7. Nedle rollers.
8. Needle thrust bearings.
9. Drawn cup bearings.
10. Drawn cup roller clutches.
The Spec Of Machine Tool Manufacturers : 1. Suitable sawing material (all kind of nonferrous material) such as：aluminum door / window frame, aluminum extrusion, heat dissipating piece, plastic steel material, acrylic, copper pipe, carbon board, and timber, etc.
2. Usage: it's convenient for cutting any size. Cutting angle 90° and 45°.
3. Advantages of S....
The Spec Of Machine Tool Manufacturers : Hydraulic press brake. 1. Capacity: 4.0-20 mm.
2. Width: 2600-6200 mm.
3. Pressure: 80-1000 tons.
4. Stroke: 180-350 mm.
5. Number of controllable axes: 4-11. ....
The Spec Of Machine Tool Manufacturers : 1. Efficient, accurate power turret (optional):
(1) The electric H4 turret is driven by a worm gear/worm wheel mechanism for convenient tool change. It is powered by a 375 W. motor with great clamping force up to 1 ton.
(2) Specially designed post body prevents coolant and chips getting into post. Body will not move....
The Spec Of Machine Tool Manufacturers : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision. 1. Spindle speed 60~10000 rpm (STD).
2. Spindle speed 60~15000 rpm (OPT).
3....
The Spec Of Machine Tool Manufacturers : Features
Twin CNC System Single spindle, two turrets
Single spindle (fixed) , two turrets (movable) and twin CNC system. Two turrets can operate simultaneously and carry out different cutting process on both ends.
Shaft , rod , or tubes both ends cutting (O.D.&I.D) are carried out simultaneously to obtain very high....
The Spec Of Machine Tool Manufacturers : 1. Spindle motor: 5H x 2P.
2. Slide way drive motor: 1HP x AC.
3. Hydraulic motor: 5HP x 6P.
4. Machining hole Dia.: 2-25 mm.
5. Machining depth: 500 mm. 1. Spindle R.P.H: 600-6000 rpm.
2. Remarks: spindle and workplace linking-up change speed. ....
The Spec Of Machine Tool Manufacturers : 1. One-step forming keeps bottle clean. Suitable for cosmetics, pharmacy, etc.
2. Automatic system control.
3. Values can be saved when mold exchange.
4. Slow mode makes mold exchange more safety and convenience.
5. PID of heaters are control by computer, It can control temperature precisely even when screw are h....
The Spec Of Machine Tool Manufacturers : The main service items are spring equipments for vehicles, such as spring machines, spring end grinding machines and peripherals.
Fully support various requirements of our customers. 1. Wire capacity (mm): ø2-ø5.
2. Length detector: no.
3. Max.spring OD.: ø80mm.
4. Spring length: 20-200mm.
5. Power cons....
The Spec Of Machine Tool Manufacturers : Application:
C frame forging press is suitable for trimming, bending, piercing processes of small parts and forging parts. It is good in trimming and punching for metal parts after forging.
Features:
Joint type pneumatic brake and clutch design ensures punching is precise and accurate.
Rigid machine body through ....
The Spec Of Machine Tool Manufacturers : 1. Capacity: Ø12mm - Ø25mm.
2. Grinding wheel:
(1) CBN #150 x 1PC.
(2) SDC #150 x 1PC.
3. Motor: 1000W.
4. R.P.M.: 4300 R.P.M.
5. Easy, fast, precision. 1. Power supply: AC110V or AC220V single phase.
2. Weight: 31 KGS. ....
The Spec Of Machine Tool Manufacturers : We are pleased to manufacturing any types of customized or special order rotary die for customers. We also provide many types of material for rotary die as customers optional choice. 1. Baby diaper cutter.
2. We can produce any sizes and styles as your requests, welcome OEM & ODM. ....
The Spec Of Machine Tool Manufacturers : The equipment installed with press mould for metal parts processing. The feature are:
1.Strong body and puncher, and simple maintenance.
2. Cushions are attached on both ends for stable operation (Please note on the order if the product without cushions).
3. Magnet as optional accessory for sensor switch use.
4. To....
